FREE Shipping, on order total of $250 or more, signature required on shipment.
Power CablePower Cable replacements for all Humminbird fishfinders, radios, and GPS equipment have a connector at one end and soldered bare leads for connection to the power source at the other. Power connection should be made to the boat's fuse panel or through an inline fuse holder (not included on most cables) if made directly to the battery.Description: Power cable, 6 ft, waterproof. Used with all Humminbird products produced since 1989For Use With: TCR-ID-1, TCR-101, TCR-ID-10, PLATINUM ID 120, PLATINUM ID 600, LCR400, LCR400 ID, DIM 3-120, DIM 3-600, LCR 100G, WIDE ONE, WIDE EYE, WIDE VIEW, WIDE VISION, WIDE 3D VIEW, WIDE 3D VISION, WIDE 3D VISTA, WIDE 100, WIDE 128, WIDE OPTIC, WIDE PORTRAIT, WIDE PANORAMA, WIDE PARAMOUNT, WIDE 3D PARAMOUNT, WIDE W, PRO FLASHER, LCR 120, OEM-LCR, LCR-3D, HBL201G, SR-ID 600, ULTIMA, 100SX, 200DX, 300TX, 400TX, PRO ANGLER, TOUR SERIES, PRO ANGLER 160, XTREME 160, TRACKER 160, TRAK PRO 128, 105SX, 405SX, ALL PIRANHA PRODUCTS, LEGEND 1000, LEGEND 1000 DEEP, LEGEND 2000, LEGEND 2000 DEEP, LEGEND 3000, LEGEND 3000 DEEP, ALL MATRIX ALL PIRANHA PRODUCTS, ALL FISHFINDER 300 SERIES, ALL 500 SERIES, ALL 700 SERIES, ALL 900 SERIES.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.
PC 11 Power CableFiltered power cable, 6 ft, waterproof. Used with all HELIX 9 Series, HELIX 10 Series, HELIX 12 Series, 800 Series, 900 Series, 1100 Series products, 797, 798.
UC H5 HELIX 5 CoverFeatures:
UC H7 HELIX 7 Unit CoverFeatures:
MHX-HS Transom Transducer Hardware740011-1Features:
AD XTM 9Transducer Mounting HardwareThis hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor.For use with:
MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers.
The Ethernet Adapter Cable is an approximately 12" cable that is required if you want Ethernet capabilities on a 700 HD Series Humminbird product. If you are connecting one 700 HD Series product with another 700 HD Series product, you will require two of these cables. If you are connecting one 700 HD Series product with either a 800, 900 or 1100 Series product, you will only need one of these adapters plus one of the AS EC2, 10, 20 or 30 foot cables. Software updates on some 700 HD and some 800, 900 and 1100 Series products may be necessary also.
PC12 Power Cord - 6'6' Power CableCompatible Devices:
GM H5 Gimbal Mount for HELIX 5HELIX 5 Series gimbal mounting bracket
GM H7 Gimbal Mount for HELIX 7 SeriesReplacement Mounting Bracket Kit includes attachment screws and knobs.Compatible Devices:
Quick Disconnect MountThe Quick Disconnect Mount provides tilt and swivel, as well as a simple snap installation an removal of the unit.Description: Quick Disconnect Mount System for all Matrix Units. For Use With: Matrix 10, Matrix 15, Matrix 17, Matrix 20, Matrix 25, Matrix 27, Matrix 35, Matrix 37, Matrix 55, Matrix 65, Matrix 67, FF515, FF525, FF535, F565, FF585, FF595, 727, 737, 767, 777C, 777C2, 787C, 787C2
The Tour Series Sonar Adapters are designed to provide clean, clear signals for the leading brands of sonar.For the following models:Humminbird: 100SX/100PT, 105SX, 200 DX/PT, 405 SX/Plus, Angler 400+, HDR 600 In-Dash, HDR200, HDR600, LCR 100, LCR 400/ID/PT, LCRW, Legend 1000, Legend 2000, N525, Pro Angler 400SX, TCR-ID-10, TFX100 In-Dash, TFX128, TFX160, Tracker Pro 160, Trak Pro 128DX, Wide 100, Wide 128, Wide W, WPS60-ID In-Dash, 141c, 161, 323, 343c, 363, 383c, 300TX, 400TX, 917c, 931c, 937c, 957c, 981c SI, 987c SI, 717, 727, 737, 747c, 767, 777c2, 787c2, 797c, FishFinder 515, FishFinder 525, FishFinder 535/PT, FishFinder 565, FishFinder 575, FishFinder 580, FishFinder 585c, FishFinder 595c, HDR610, Legend 3000, Matrix 10, Matrix 12, Matrix 15, Matrix 17, Matrix 20, Matrix 25, Matrix 27, Matrix 35, Matrix 37, Matrix 55, Matrix 65, Matrix 67, Matrix 77C, Matrix 87C, Matrix 97, Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, PiranhaMAX 10, PiranhaMAX 15, PiranhaMAX 20, PiranhaMAX 30, PiranhaMAX 210, PiranhaMAX 215, PiranhaMAX 220, PiranhaMAX 230, PiranhaMAX 240, TFX320, Wide 2000, Wide Eye, Wide Optic, Wide Panorama, Wide Paramount, Wide Portrait, Wide View, Wide Vision
IMDK H5 In Dash Mounting Kit for HELIX 5 SeriesIn-Dash Mounting Kit for HELIX 5 Series
AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket
MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit.
The Russell Marine Products Tempered Glass Screen Protectors are the latest in state-of-the-art marine screen protection technology. Highly durable and scratch and chip resistant, this strong 9H (hardness level) protector will guarantee your MultiFunction Display the best protection against drops, bumps, scratches, lures, and normal wear and tear. Our Oleophobic coating is Anti-fingerprint and anti-oil smudging due to the oil resistant coatingthat is applied during manufactureing also making it anti-scratch. All the protection without any bulk - RMP Tempered glass screen protectors are a mere .30mm thin making them ultra-light weight to allow for a 'delicate touch' style screen protector that will not to interfere with the sensitivity of your touchscreen. These work with both touch and non touch units.The screen protector will fit Lowrance: Solix 10 Units
MHX-XMKKayak Mounting HardwareTransducer Mounting Hardware for installation in a Kayak. Kit includes surface preparation products in addition to a transducer cradle and adhesive products
CC ICE780015-1Soft-sided carrying case. (No shuttle, battery, or charger)
AS GPS NMEA ONIX Splitter CableONIX Splitter Cable to connect with optional external GPS receiver AS GRP or AS GPS HS for 1 additional NMEA 0183 communication
Ethernet Cable - 10 FeetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.
AS-EC-15E Ethernet Cable - 15'Features:
14-M360-2DDI-Y - MEGA 360 & 2D/MDI 14-Pin Y-Cable
This Y cable allows for the connection of a MEGA 360 Imaging transducer and a 14-pin HW / MDI+ transducer (including Built-in MEGA Imaging) to the same compatible Humminbird fish finder.
Ethernet cable - 20 feetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths.
Current Models: HELIX 10, HELIX 12, HELIX 5, HELIX 7, HELIX 9, SOLIX 12, SOLIX 15
Discontinued Models: 1100 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, ONIX
Trolling Motor TransducerTrolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a switch to allow the fishfinder to display information from either the transom or the trolling motor. Some Transom Mount Transducers can be converted to Trolling Motor Mount by purchasing a Trolling Motor Adapter.Description: Trolling Motor Transducer with Temperature Sensor, Hydrodynamic, dual beam, 20 and 60 degree cone angles, 200/83 kHz. Includes 15' cable, trolling motor mounting hardware.For Use With: Piranha 5, Legend ID40, Matrix 15, Matrix 17, Matrix 25, Matrix 17, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565
Portable TransducerPortable Transducers mount on the transom or side of almost any wood, aluminum, or fiberglass boat. A heavy duty rubber suction cup provides for temporary installation and holds the transducer at trolling motor speeds only. For a completely portable fishfinder, The Portable Case (PTC-W2) accessory contains all parts needed to convert your existing fishfinder to portable operation using your existing transducer.Description: Portable Transducer with Temperature Sensor, Hydrodynamic, single or dual beam (depending on which fish finder it is used with), 24 and 53 degree cone angles, 200/83 kHz. Includes 15' cable, portable mounting hardware.For Use With: Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565, PMAX10, PMAX15, PMAX 20
Puck TransducerDescription: Puck transducer . Single/Dual Beam, 20/60 degree, 200/83 kHz with built in temperatureFor Use With: Legend ID40, Piranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.
Back to top