|
|
|
|
|
|
|
|
|
|
|
|
|
The Electronics Glove Cover will fit Lowrance HDS12 Gen2 and HDS12 Gen3, Elite 7HDI, Elite7 Chirp and Hook7. These electronic gloves covers can be used during transport with the wires being connected to the unit. Units may need to be tilted to allow it to fit on the gimbal bracket with the wires connected.
THESE WILL NOT FIT A HDS LIVE UNIT.
|
This electronics glove cover will fit Lowance HDS7 Gen2, HDS7 Gen3, Elite 7HDI, Elite7 Chirp and Hook7. These electronic glove covers can be used during transport with the wires being connected to the unit. The units may need to be tilted to allow it to fit on the gimbal bracket with the wires connected.
THESE WILL NOT FIT A HDS LIVE UNIT.
|
This Electronics Glove will fit Lowrance HDS9 Gen2, HDS9 Gen3, Elite 9HDI, Elite 9 Chirp and Hook 9. These electronic gloves covers can be used during transport with the wires being connected to the unit units may need to be tilted to allow to fit on the gimbal bracket with the wires connected.
THESE WILL NOT FIT THE HDS LIVE UNITS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our New RMP Metal Gimbal Knobs have 1/4-20 threads & work with Lowrance & Garmin Fish-Finders!
These are significantly more durable than the factory knobs that come stock with the units, making a great addition to an upgraded set up along with our RMP Gimbal Brackets!
|
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
-Made in USA
|
RMP HDS 9 Gimbal Bracket
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
-Made in USA
For HDS Gen 2,3, & Carbon
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RMP HDS LIVE 9 Gimbal Bracket
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
-Made in USA
|
RMP HDS 12 Gimbal Bracket
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
This gimbal bracket is compatible with: Lowrance HDS Gen 2, 3, Carbon
Made in the USA
|
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
-Made in USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you hit rough water, our rigid mounts will keep your graphs in place. Our all-new SS Gimbal Brackets are here to replace the stock brackets that come standard with graphs, ultimately upgrading your setup. Crafted from stainless steel and sitting at 0.125" thick, this thing is indestructible.
-Made in USA
|
The RMP Lowrance Active Imaging & TotalScan Transducer Trolling Motor Mount for Elite TI2 and HDS models.
This mount works with 80 pound trolling motors and above on the:
Minn Kota Ultrex
Fortrex
Maxxum Pro
Motorguide Tour
X5 Trolling Motors
It will work even if you have the built in sonar in your Minn Kota or Motorguide trolling motors that have the transducer mounted in the front head of the trolling motor.
These WILL NOT work with a Front Skeg Trolling Motor.
This mount will work with the LSS-2 Transducer, TotalScan Transducer, 3-N-1 Active Imaging Transducer, & 2-N-1 Active Imaging Transducer.
|
The RMP Lowrance Tripleshot Transducer Trolling Motor Mount for HOOK models.
This mount works with 80 pound trolling motors and above on the:
Minn Kota Ultrex
Fortrex
Maxxum Pro
Motorguide Tour
X5 Trolling Motors
It will work even if you have the built in sonar in your Minn Kota or Motorguide trolling motors that have the transducer mounted in the front head of the trolling motor.
These WILL NOT work with a Front Skeg Trolling Motor.
This mount will work with the Tripleshot Transducer for HOOK models ONLY.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Limited Availabilty
TMR-1 Remote for Ghost Trolling Motor Features: - Adjust speed
- Change direction
- Set Anchor
- Includes lanyard
|
This Jackplate mounting system allows the user to install a lowrance structure scan transducer to a manual or hydraulic jackplate configuartion.
|
|
|
