|
|
|
|
|
|
|
|
|
|
|
Retrofit Cover Up Bezel - MFG# 001-156-750 - flush mount bezel for the GP33 and RD33 display unit - Used when the display is flush monted in a space previously occupied by a GP30/RD30 style display
|
Powercord - 3 pin - 3.5 meters - MFG# 000-135-397 - Used with GP7000 - FA150 - GP1650/1850 - BBFF1 - and older fishfinders such as the FCV582L
|
Ethernet LAN Cable for NavNet 3D - MFG# 001-167-880-10 - RJ45 to RJ45 connectors - 4 pair wires - Length: 2 meters
|
|
|
|
|
|
|
|
|
|
|
|
|
NavNet display adapter cable - MFG# 000-159-689 - 6-pin to Ethernet adaptor cable for NavNet-vx2 displays - 0.5 meter long
|
Optional table top bracket for TZTL12F - w/knobs - MFG# 001-337-410-00
|
Transducer extension cable - MFG# AIR-033-203 - 10 pin male to 10 pin female - 4 meter (13') length
|
|
|
|
|
|
|
|
|
|
|
|
|
Depth Transducer w/ Temp - MFG# 525T-PWD - 50/200KHz - 600 Watts - 40/10 deg beam angle - w/ temp sensor (no speed) - P66 plastic transom mount - Includes 30' cable w/ 10 pin connector
|
LAN Cable Asembly - MFG# 001-167-900-10 - 10 meter - RJ45 X RJ45
|
GPS Antenna - MFG# GPA017 - Passive GPS Antenna - Replacement for units with built-in receiver - such as GP32 or 1650/1850 - Includes 10M cable w/ TNC connector
|
|
|
|
|
|
|
|
|
|
|
|
|
Signal/Power Cable - MFG# 001-376-480-00 - for DRS4DL radar - 15 meter length
|
NMEA 0183 to NMEA 2000 converter - MFG# IF-NMEA2K2 - converts from NMEA 0183 to NMEA 2000/CAN bus and vice-versa - Selectable Hi-Speed mode for heading and AIS data
|
Depth transducer w/ temp - MFG# 525T-LTD/12 - 50/200KHz - 600 Watt - 45/12 deg beam angle - w/ temp sensor - B60 low-profile bronze thru-hull (2.4" shaft) with 12 deg tilted element - Includes 30' cable w/ 10 pin connector
|
|
|
|
|
|
|
|
|
|
|
|
|
Depth transducer w/ temp - MFG# 525T-LTD/20 - 50/200KHz - 600 Watt - 45/12 deg beam angle - w/ temp sensor - B60 bronze low-profile thru-hull (2.4" shaft) w/ 20 deg tilted element - Includes 30' cable w/ 10 pin connector
|
GPS Antenna - Differential - MFG# GPA021S - for GP170D
|
Optional Bracket for TZTL15F w/knobs - MFG# 001-337-420-00
|
|
|
|
|
|
|
|
|
|
|
|
|
Radar Cable - MFG# 000-167-640 - 15 meters - for DRS25A
|
Smart sensor w/ temp - NMEA 2000 - MFG# DT-800MSF - 235KHz sounder w/ temp sensor - B617 bronze low-profile thru-hull (2" shaft) housing - Includes 6.5' NMEA 2000 drop cable
|
Depth - Speed - & Temp transducer - MFG# 525STID-MSD7 - 50/200KHz - 600 watt - 45/11deg beam angles - speed & temp sensors - B744V long-stem bronze thru-hull housing (7.9"L - 2"dia - shaft) - Includes 30 foot cable with 10 pin - Fairing block sold separately
|
|
|
|
|
|
|
|
|
|
|
|
|
Smart Sensor w/ speed & temp - NMEA 2000 - MFG# DST-800MSF - 235KHz depth sounder - speed paddlewheel - and temp sensor - B617 bronze thru-hull low-profile (2" shaft) housing - Includes 6.5' NMEA 2000 drop cable
|
NavNet WAAS/GPS Antenna - MFG# GP330B - NMEA 2000 GPS/WAAS Antenna/Receiver - for use with NavNet-3D or any NMEA 2000 system - Includes 6M cable
|
Depth transducer w/ temp - MFG# 525TID-BHD - 50/200KHz - 1000 Watt - 15x21 deg (50KHz) & 3x5 deg (200KHz) beam angle w/ temp sensor - B258 bronze thru-hull (1.2" shaft) w/ hi-speed fairing - Includes 30' cable with 10 pin connector
|
|
|
|
|
|
|
|
|
|
|
|
|
Dedicated Ethernet Hub for NavNet 3D - MFG# HUB101 - Eight port Ethernet hub - allows all MFDs to be turned on automatically when one unit is turned on
|
Chart Plotter/Sounder - MFG# GP1871F - with 7" Multi-Touch "Glass Helm" LCD - internal GPS - CHIRP sounder with up to 1 kW power (transducer dependent) - WiFi for use with DRS4W radar - smartphone - Uses C-Map charts (sold separately)
|
Heading Sensor - MFG# PG500R - Rate Compensated Fluxgate Heading Sensor - Automatic compensation (w/ GPS input) - Includes 2M combo cable and data cable - For use w/ ARP10 or 11 radar plotters and NavPilot system
|
|
|
|
|
|
|
|
|
|
|
|
|
Integrated Heading Sensor - MFG# PG700 - NMEA 2000 data output - angular velocity (rate) sensor - automatic determination of installation site suitability - L-shaped mounting base for mounting on bulkhead - Can supply heading to autopilot - plotter - or radar
|
DepthTransducer with Temp - MFG# 526TID-HDD - 50/200KHz - 1000 Watt - 20/6 deg beam angle - with temperature sensor - B260 bronze thru-hull housing (1.3" shaft) - Includes 30' cable w/ 10 pin connector and hi-speed fairing block
|
Depth Transducer - MFG# B285M - Medium-Frequency CHIRP (85-135kHz) with temperature - 1000 Watts - bronze thru-hull with high-speed fairing block - No connector
|
|
|
|
|
|
|
|
|
|
|
|
|
Chart Plotter/Sounder - MFG# GP1971F - with 9" Multi-Touch "Glass Helm" LCD - internal GPS - CHIRP sounder with up to 1 kW power (transducer dependent) - WiFi for use with DRS4W radar - smartphone - Uses C-Map charts (sold separately)
|
Thru-Hull Multibeam Transducer - MFG# 165T-B54 - for the DFF3D - Provides a 120 degree port-starboard view of the underwater world - Internally stabilized - Includes fairing block
|
Transom Mount Multi-beam Transducer for DFF3D - MFG# 165T-TM54 - provides a 120 degree port-starboard view of the underwater world - Internally stabilized
|
|